Revit plugin
The Revit plugin sends your model’s types and quantities from Revit to a project in LCAbyg. Nothing in the project changes until you have reviewed and approved the submission in LCAbyg.
System requirements
Section titled “System requirements”- Revit 2022, 2023, 2024, 2025, 2026 or 2027
- Windows
Install the plugin
Section titled “Install the plugin”- Get the installation package from LCAbyg. It is a zip file. If the server has a download address, Download plugin appears under New import on the project’s Models page. If it says Contact us to get the plugin instead, click it, and send the message to support. It has the subject Access to the Revit plugin filled in.
- Close Revit. A plugin that Revit has loaded cannot be overwritten.
- Unzip the file, and double-click
Install.cmd. - Read the window. It says which server the plugin uses, and whether the server accepts submissions from Revit.
- Start Revit. The first time, Revit asks whether LCAbyg may be loaded. Choose Always Load.
The LCAbyg tab is now in the ribbon. The plugin is installed for the Revit versions on the computer, and only for your Windows user, so it does not require administrator rights. If Revit is set to Danish, the buttons are in Danish, otherwise in English.
The LCAbyg tab
Section titled “The LCAbyg tab”| Button | What it does |
|---|---|
| Send to LCAbyg | Sends the model to the project, see Send the model |
| Status | Shows who you are logged in as, the project the model is linked to, and the project’s result |
| Results | Opens the results overview for the project’s default version in your browser |
| CO₂ in the model | Shows LCAbyg’s CO₂ figures on the model in a 3D view of its own, see the section on CO₂ in the model below |
| Open project | Opens the project in LCAbyg in your browser |
| Account | Sign in, switch account or sign out. When you are signed in, your name is on the button |
Sign in
Section titled “Sign in”- Click Account, and choose Sign in.
- LCAbyg opens in your browser and shows the account you are connecting. Click Grant access.
- Go back to Revit. The window waiting for the login closes by itself. If you close it yourself, the login is cancelled.
The login applies to all your Revit versions on the computer. Submissions from Revit are sent as the account you are signed in with.
Send the model
Section titled “Send the model”- Open the project model
.rvtyou want to send. A family file.rfacannot be sent. - Click Send to LCAbyg.
- The first time, you choose the project in the Choose project window, see Choose or create the project. The model is linked to the project, so you do not have to choose again.
- In the What should be included? window you tick the linked models that are to be included, see What is included.
- The Send the model to LCAbyg? window shows the project, the number of types and elements, and how many types have a classification code. Click Send, or Choose another project.
- When the The model has been sent window appears, the submission is waiting for your review. Click Open the review in LCAbyg to go straight to it.
Review and approve the submission under Models. Only your approval creates a new version.
If there is already a submission from the model that has not been approved, the new one supersedes it. This is shown in the confirmation before you send.
Choose or create the project
Section titled “Choose or create the project”Under Existing project you can search among the projects you can edit. Under New project you create a project straight away:
- Name: The project’s name.
- Template: A project the new project is based on, or No template.
- Classification: The classification system. The plugin recommends the system that knows the most of the model’s codes.
- Calculation mode: Controls the review’s suggestions for exclusions and products. If you choose a template, the template decides the mode.
- Storeys above ground, Storeys below ground and Storey height (m): Filled in from Revit’s levels that are marked as storeys. Check the figures.
Click Create and choose. Areas are not taken from Revit. You enter them in LCAbyg when you review the first submission.
The link to the project is saved in the model, so a colleague who opens the same model sends to the same project. If the model cannot be saved (it is read-only, or a colleague owns Project Information), the link is only saved on your computer, and colleagues have to choose the project themselves.
What is included
Section titled “What is included”Everything that is built is included, also elements that are hidden in a view. Non-primary design options are not included.
- Linked models: Tick the links that are to be included, and do not include the same one twice. A link that is not loaded cannot be read. A link that is placed several times is sent once.
- Closed worksets: Elements in closed worksets are not included. Click Send without the closed worksets, or Open worksets in Revit to open them first. The plugin never opens them itself.
Tick Remember the choice for this model and do not show the window again if you want to skip the window next time. It comes back if the model’s links change, or if there are closed worksets.
Views, levels, grids, reference planes, imported CAD, point clouds, cameras, entourage and conceptual masses are not sent. Groups and assemblies are not sent as types, but the elements in them are. Likewise ducts, pipes and fittings are sent separately, but not the MEP systems they belong to.
What is sent
Section titled “What is sent”The plugin sends the model’s types with their layers and materials, classification, phases and quantities (area, volume, length and count). If a value is missing in the model, it is sent as empty, never as 0.
The classification is read from the official parameters: BIMTypeCode and CCS (Molio C420a). The type’s other short text parameters are also sent, and if LCAbyg recognises a classification code in one of them, it is used for the suggestions in the review. If no types carry a code, the suggestions are based only on names and your earlier choices.
Status
Section titled “Status”Status shows:
- Who you are logged in as, and the project the model is linked to.
- Active version (the project’s default version), Last approved, and whether a submission is Waiting for review.
- Climate impact in kg CO₂e/m²/year with the limit value and Met, Not met or No verdict.
From here you can also open the project or the review. If you have chosen not to see the windows when sending, you get them back with Show all windows again.
CO₂ in the model
Section titled “CO₂ in the model”CO₂ in the model opens the LCAbyg: CO₂ in the model panel, which colours the model by LCAbyg’s figures for the project’s default version. The figures are the same as the building model in LCAbyg shows (all modules except D). The model must have been sent, and the submission approved.
- Choose Total CO₂ to see where the CO₂ is in the building, or CO₂ per unit to see which types are the heavy choice.
- Click Refresh the colours.
The colours are shown in the plugin’s own 3D views, LCAbyg CO₂ total and LCAbyg CO₂ per unit. The elements and your own views are not changed.
- The scale divides the types into five equal groups from green to red. Under Total CO₂ you can show the figures in kg, kg/m² or kg/m²/year. Per m² is divided by the reference area, and per year by the assessment period, as in LCAbyg’s results.
- No data is types without a construction or without a calculated figure. Not in LCAbyg is elements that were not in the latest approved submission.
- The tag in the panel says whether the colours are Up to date, Not up to date or Not checked. Click Check again to see whether anything has happened since: a waiting submission, changes in LCAbyg, another default version, or changes in Revit that have not been sent.
- Remove the colours deletes the plugin’s own CO₂ views. Switch to another view first, because Revit cannot delete the view that is open.
Only the host model is coloured, not linked models.
Show in Revit
Section titled “Show in Revit”In the review in LCAbyg you can click Show in Revit on a line to select the line’s elements in Revit. Revit must be open, you must be logged in, and the model must be the active one. If the elements are in a linked model, Revit says so.
New version of the plugin
Section titled “New version of the plugin”If a newer version exists, the plugin says so when you send. Click Download the new version to open the page with it, or Send with the version I have. Close Revit before you install the new version.
Sign out and uninstall
Section titled “Sign out and uninstall”Click Account, and choose Sign out. The connection is removed for all Revit versions on the computer and from your account. If LCAbyg cannot be reached when you sign out, the device still shows as connected. Then remove it under Settings, Connected devices.
To uninstall the plugin:
- Sign out in Revit, so the device is also removed from your account.
- Close Revit.
- Double-click
Uninstall.cmdin the unzipped installation package.
If something goes wrong
Section titled “If something goes wrong”| Message | What you do |
|---|---|
| Not included in the subscription | Submission from Revit is not included in the subscription for the project. Contact LCAbyg |
| The version is locked | The project’s default version has been delivered and locked. Make a new version in LCAbyg, and send again |
| Sign-in expired | Sign in again under Account |
| The add-in needs an update | The plugin is too old for the server. Install the latest version |
| LCAbyg is busy | LCAbyg is reading another model. Wait a moment, and send again |
| The project can no longer be used | You can no longer send to the project the model is linked to. Choose another project |
In case of an unexpected error, the plugin sends the error to LCAbyg together with your account. If it cannot be sent, send a screenshot of the message to support.
An element has a negative quantity
Section titled “An element has a negative quantity”The plugin sends the elements’ Area, Volume and Length as Revit itself calculates them. A quantity cannot be negative, so if Revit gives a negative value, LCAbyg does not use it. The submission goes through, but the element’s line lacks the quantity, and the review says so in two places:
- At the top of the review it says how many elements have a negative quantity.
- The line is marked Negative quantity and says which quantity it is, and the lowest value Revit gave.
How to find the element:
- Click Show in Revit on the line to select the line’s elements in Revit.
- Look at the elements’ Area, Volume or Length in Properties, and find the element that has a negative value.
- Fix the element in the model, and send again.
Autodesk describes, for example, negative volumes on floors from an IFC file that Revit has opened.
See also
Section titled “See also”- Models: review and approval of submissions
- How to calculate design variants when the quantities come from a model