Machine-translated from Danish

Transport

Transport in module A4 for all building products in the building model. Opened via Transport in the project menu. It is a single page: two default-value settings at the top, and below them the table with transport per individual building product. At the top right, a counter shows how many of the building model’s building products have been configured.

Default values

Two settings, each with its own switch:

Setting	Meaning
Transport of surplus materials, packaging and similar (A4)	Transport is accounted for from default values per kg of material, plus 0.02 × reference area × duration
Terminal processes (A4)	The contribution from transhipment and sorting, fixed at 0.02 × reference area × duration

If a setting is marked Locked by calculation mode, it is controlled centrally by the selected calculation mode and cannot be changed here.

Materiel transport (A4) does not belong here: it sits under Construction site as the card “Materiel transport (A4)”.

Heaviest building products

A shortcut to the five building products that weigh the most in total, where all occurrences of the same building product are counted together. These are the ones transport typically matters most for.

The building product table

The search field searches building product, construction and category. Next to it are three filters: All, Missing and Configured.

Column	Meaning
Building product	The building product’s name
Construction	The construction the building product is part of
Category	The building product’s place in the building model
Has A4	Whether the building product has transport specified
Method	How transport is accounted for on this particular building product
Value	The calculated transport value, or an explanation of why there is none
Status	Missing or configured

Auto-fill everything missing

The Auto-fill missing (N)… button next to the search field fills every building product with status Missing, without needing to mark them individually. Per building product, the source is chosen in priority order: first another, already-configured row in the project for the same building product (same owner, GUID and version), otherwise the library’s default transport. A dialog shows the whole plan, grouped by source, before anything runs, and rows with no source are reported in the result afterward.

Several building products at once

Mark building products with the checkboxes on the left, and an action bar appears above the table:

Action	Meaning
Choose method + Apply	Set the same method on all marked building products
Copy from building product	Transfer another building product’s transport setup to the marked ones
Fill from library	Fetch the transport from the library’s data
Remove transport	Reset the transport on the marked building products